Back to Knowledge Base

Can this Gates fuel hose withstand a slight bending and still retain its full diamater. I reqiure it for a 1981 Morgan as the nozzle on the tank is at a slight angle to the filler cap. Can this hose also be cut with say an hacksaw.

Yes, that Gates Fuel Hose will accept a slight bend as it is reinforced with two wires which run through the wall of the hose. We cut it using a hack saw, just be mindful of the ends of the wire reinforcements.

Archived in: Newton flush fit fuel caps

12th July 2016

Does the above Q&A give you the answer you were looking for?

Related products